Watts Metered Water Softener Systems with Digital Clack Valve

Watts Digital Metered Water Softener System

Click here to calculate what size water softener you need.

Required Operating Pressure: 25-100 PSI

Water Softeners for effective IRON Removal

Standard Water Softening Resin will effectively remove up to 1.5 ppm of dissolved IRON. This is a high performance softenening resin.
Ask for our optional Fine Mesh Resin Option for IRON Removal to effectively remove between 1.6 - 5 ppm of Dissolved Iron. Adds about 3-4 PSI to the pressure drop. Multiply the cubic feet x $25.

For Iron Removal Systems ask for a bottle of ResUp Cleaner. Simply add approx. 1 TBSP to your salt tank every 2 weeks or have us factory install an automatic ResUp Feeder System to your brine tank for only $15.00 extra
1 Quart bottle of Clack ResUp Cleaner (#T6001) = only $14.

Insider Tip : Install a 4.5"x20" sediment filter ( 5 micron washable) to keep rust particles out of the softener. If your water is chlorinated - install a carbon block downstream of the sediment filter. Chlorine destroys softening resins.

Notice: This professional equipment is sold to you for professional assembly, professional installation, and professional initial programming only. See Terms of Purchase at bottom of page.

Fleck 5600 Metered Water Softener System 30,000 Grains Hardness Capacity
Available as Digital Programmable or Mechanical Rotary Dials

1 cu.ft. - 9"x48" resin tank, Max. Hardness Capacity 30,000 Grains
3/4" FNPT water supply connections
Maximum Service Flow: 13.5 GPM
Minimum Required Backwash Rate: 2 GPM
Approximate Pressure Drop: 11 PSI
Max. Iron level: 1.5 ppm (recommended)

features the Fleck 5600 Metered control valve in mechanical or digital design.
A metered (vs. timered) control valve saves you both water and salt by counting how many gallons of water you use and only regenerates when you reach a certain # of gallons
Manufacturer Warranty: 5 Years on Control Valve /10 Years on Tanks
Each unit is complete with everything you need. Includes control valve, resin tank, softening resin, brine tank, and owners manual. (Not pre-loaded for shipping reasons.)
FREE Ground SHIPPING within continental USA
You may also call 210-568-3628 to order

Price: only $661.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600SE Digital Metered (simple electronics)
(Item #: FLEK5600SE948)

Price: only $645.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600 Mechanical Metered (2 Rotary Dials)
(Item #: FLEK5600MM948)

Fleck 5600 Water Softener System 48,000 Grains Hardness Capacity
Available as Digital Programmable or Mechanical Rotary Dials

1.5 cu.ft. - 10 "x54" resin tank, Max. Hardness Capacity 48,000 Grains
3/4" FNPT water supply connections
Maximum Service Flow: 18.5 GPM
Minimum Required Backwash Rate: 2.5 GPM
Approximate Pressure Drop: 11 PSI
Max. Iron level: 1.5 ppm (recommended)

features the Fleck 5600 Metered control valve in mechanical or digital design.
A metered (vs. timered) control valve saves you both water and salt by counting how many gallons of water you use and only regenerates when you reach a certain # of gallons
Manufacturer Warranty: 5 Years on Control Valve /10 Years on Tanks
Each unit is complete with everything you need. Includes control valve, resin tank, softening resin, brine tank, and owners manual. (Not pre-loaded for shipping reasons.)
FREE Ground SHIPPING within continental USA
You may also call 210-568-3628 to order

Price: only $715.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600SE Digital Metered (simple electronics)
(Item #: FLEK5600SE1054)

Price: only $700.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600 Mechanical Metered (2 Rotary Dials)
(Item #: FLEK5600MM1054)

Fleck 5600 Water Softener System 64,000 Grains Hardness Capacity
Available as Digital Programmable or Mechanical Rotary Dials

2 cu.ft. - 12"x52" resin tank, Max. Hardness Capacity 64,000 Grains
3/4" FNPT water supply connections
Maximum Service Flow: 24 GPM
Minimum Required Backwash Rate: 3 GPM
Approximate Pressure Drop: 13 PSI
Max. Iron level: 1.5 ppm (recommended)

features the Fleck 5600 Metered control valve in mechanical or digital design.
A metered (vs. timered) control valve saves you both water and salt by counting how many gallons of water you use and only regenerates when you reach a certain # of gallons
Manufacturer Warranty: 5 Years on Control Valve /10 Years on Tanks
Each unit is complete with everything you need. Includes control valve, resin tank, softening resin, brine tank, and owners manual. (Not pre-loaded for shipping reasons.)
FREE Ground SHIPPING within continental USA
You may also call 210-568-3628 to order

Price: only $825.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600SE Digital Metered (simple electronics)
(Item #: FLEK5600SE1248)

Price: only $810.

Comes with PVC Fittings. Add $50. for Brass Sweat Fittings.
Fleck 5600 Mechanical Metered (2 Rotary Dials)
(Item #: FLEK5600MM1248)

Call us at 210-568-3628 for ORDERS or ASSISTANCE

For larger units please see the Fleck 7000 series.

We need to know the following things (ask your water department):

Total Hardness in grains or ppms
Iron level in ppms
Manganese (if available)
How many people live in the house
The flow rate of the water in your pipes

Note: Iron levels of 1.9 ppm or more require intervention, as this will interfere with the softening performance. Upgrade to a Fine Mesh Resin to remove Iron levels between 1.6 - 5 ppm. Iron levels greater than 5.0 ppm require an oxidation unit installed upstream of the softener.

TERMS OF PURCHASE:

By purchasing these units you agree to abide by these terms:

Note: This professional equipment is sold to you for professional assembly, professional installation, and professional initial programming only. Use and Install at your own risk.

Prices are subject to change without notice.
We reserve the right to change incorrectly priced items or decline the sale.

Please shop responsibly. We cannot accept returns on Water Softeners - and we do not resell used equipment. Call us if you need assistance.

For Professional Installation and Setup Only. Failure to do so may void your Manufacturer's Warranty.

These units are Warrantied against material and manufacturing defects by the manufacturers only, and are subject to the manufacturer's Warranty Conditions.